NIGHT VISION LCD |industrial lcd monitor|military lcd|Night vision lcd|industrial display For military and marine applications we need special type of monitors for night time operations. It may not be possible to use the regular monitors that are not compatible with night vision equipment. During night operations where NVIS is used we need special night vision LCD monitors that can be dimmed so that it does not affect the functioning of the NVIS equipment. NVIS refers to Night Vision Imaging System and this is used for surveillance and other purposes where there is very little or absolutely no light around the object of surveillance. NVIS boosts photons from the night scene to about 2000 times. When NVIS goggles are used the environment in which the one using it should also be without any light or absolutely low levels of light. If the luminescence level is high then it will affect the NVIS badly and the vision of the one who is using it.One of the main challenges in military and marine environment is the brightness of the display units that are used. The displays should be NVIS compliant for night operation at low backlight levels. The emission should be controlled between 450 nm and 930 nm and for night operation especially between 630 nm and 930 nm. NVIS compatible LCD monitors will be able to handle wide range of colors like any other LCD monitors during daytime. If LCD monitors are used during day time in avionic and marine environments then the brightness of the display should be really high so as to produce clear images that can be viewed without any problem in highly bright environments and dimmed display during nighttime operations. To match this challenge Nauticomp has launched special NVIS or night vision LCD monitors under the label Glass Bridge Displays which can be used for nighttime military operations. Glass Bridge Displays use the latest technology to dynamically change the brightness of the display and allow the full brightness to be reduced. Nauticomp’s Night Vision LCD monitors come in various display sizes from 12.1” to 21.3”. Glass Bridge displays are capable of processing low resolution VGA signals and besides that it can accept around 10 types of input formats including component – composite, S-Video, PC graphic cards etc. The advanced technique used by Glass Bridge offers smooth transition from highly bright daytime operations to nighttime operations. It can lower the illumination to 2cd/m2 during night vision mode. With the use of Nauticomp’s night vision LCD monitors it is possible to use night vision goggles without any problem. The night vision monitors can be can be dimmed to red to protect the vision of those who use night vision goggles that are highly sensitive to red spectrum. Nauticomp’s night vision LCD monitor has a user friendly interface called GB commander and using this single interface up to 10 displays that are connected through USB cables can be adjusted. Once the settings are adjusted they can be stored for later use so we don’t lose the settings when the monitor is switched off. To know all about Nauticomp’s night vision LCD monitor and to download the detailed product specifications please visit www.nauticomp.com. |
